SELF-DUMPING HOPPERS

Fabricated from 10 gage mild steel, painted black and modified with a drain fitting and base grill

½ cu.yd. – 28” BELT

1 cu. yd. – 42” BELT

2 cu.yd. – 60” BELT

 

POST FILTRATION SYSTEM

SINGLE FILTER

  • 1 (one) 19” Diameter Multi-media filtration vessel with backwash capability
  • 1 (one) 13GPM booster pump

DOUBLE FILTER

  • 1 (one) 19” Diameter Multi-media filtration vessel with backwash capability
  • 1 (one) 19” Diameter GAC carbon filtration vessel with backwash capability
  • 1 (one) 13GPM booster pump

PLC WITH HMI

  • Siemans S7-1200 CPU
  • Simatic HMI ( 9”)
  • Phoenix ethernet splitter
  • 5 port E switch
  • Necessary shielded cabling for the panel enclosure
  • 1 (one) eWON device for short-term Data Logging and prepared for Remote Access. Customer to provide internet connection for remote access at their own discretion.
  • Programming parameters to be determined which may affect the price.

METAL PRECIPITATION CHAMBER

  • Initial entry chamber to accommodate required retention time for DTC additive for dissolved metals. Integral with the unit.
  • 1 (one) ⅓ hp mixer, variable speed with potentiometer on the panel door for speed control.
  • Turbo prop and shaft designed for optimum mixing.
  • Chemical feed pump for the DTC

PRE AND/OR POST pH ADJUST TANK (INTEGRAL WITH THE UNIT) WITH MIXERS AND DUAL PH CONTROLLER CONSISTING OF THE FOLLOWING

  • PHCN panel mount pH controller
  • PH probe PHE 65-10
  • PH probe mounting hardware PHE 65-10
  • 1 (one) chemical feed pump 44 L/day PHP 502 Kynar

PRE- TREATMENT

POST TREATMENT 

OZONE UNIT

120 mg/hr. (Batch units)

3000 mg/hr.

5000 mg/hr.

8000 mg/hr.

LOW HEIGHT OPTION # 1

Side Saddle unit. This unit has the mix chamber alongside the self-indexing while still allowing true gravity flow of the treated water and residue onto the self-indexing filter bed. The result is a lower overall height but a wider footprint. Stairs and platform are still required and included.

LOW HEIGHT OPTION # 2

TDB( Top Deep Bed) this unit has the mix chamber located under the self-indexing filter bed. The treated water and residue are pumped onto the self-indexing filter bed. An AOD (Air Operated Diaphragm) pump is recommended but a centrifugal pump can be used. Stairs and platform are not required.

SUPER SAC TOTE SYSTEM OR FLOOR LEVEL HOPPER

This system allows the use of a 2000 lb sac of reactant to be used or a 5.2 cu.ft floor level feed hopper. An auger drive mechanism transfers the reactant in the super sac to the feed hopper which will have a high/low proximity sensor to keep it full. Comes with:

  • 304 stainless steel base
  • anchor bearing
  • 2 (two) 50’ lengths of flexible flyting
  • 30’ of 3” novacor tubing
  • 2 (two) 45º novacor sweeps
  • 6 (six) clamps
  • Drive unit with inspection box and drive anchor clamp
  • Support frame for the drive unit.
  • Forklift cage with fork guides for the super sac.

NOTE: INCREASES THE HEIGHT BY 46”

CONSUMABLES

Reactive Separating Agent (RSA)

MS 310MC comes in 50lb (22.7kg) bags

Available in:

  • Less than skid lot (2,100 lbs)
  • Skid lot (multiples of 2,100 lb skids)

Filter Cloth Media

  • 86” x 250 yd .70 oz. polyester filter cloth roll
  • 60” x 250 yd .70 oz. polyester filter cloth roll
  • 42” x 250 yd .70 oz. polyester filter cloth roll
  • 28” x 250 yd .70 oz. polyester filter cloth roll